Telephone How to ...

Bag-in-Box Filling Support Frame with Tap Closing Tool - 96366

This useful frame supports the collar of the 3, 5, 10 & 20 litre bags (from bag in box and pouch) during filling, and includes a tap closing tool.

  • Supports the neck of 5, 10 & 20 litre bags (from bag in box) or 3 litre pouch for clean and easy filling
  • With hinged hand-lever to close the tap of the bag - this is otherwise difficult to do by hand

NB We recommend that the support frame is screwed to a wooden base (full instructions supplied). In order to fill 20 litre bags the tool must be raised on the wooden base by between 60-65mm. Wood not supplied.

Price: £29.00

£8.50 delivery on orders up to £100 - geographical restrictions & conditions apply, see Delivery

In Stock
 
  • How It Works:
  • Specification:
  • Secure the tool to a wooden base (full instructions supplied for a simple wooden base - see Specification for materials required)
  • Slot the lower flange of the bag neck into the 'C' shaped holder
  • Remove the tap of the bag
  • Fill the bag to appropriate level
  • Push top of bag to expel air
  • Replace tap and push in one click
  • Push down hinged lever to drive tap fully home
  • Screw holes in base to enable screwing to a wooden base (full instructions supplied for a simple wooden base - see below for materials required)
  • 'C' shaped holder to slot the lower flange of bag neck into
  • Hinged hand-ever to close the tap of the bag
  • Made from steel (electrostatically painted)
  • Length: 41.5cm / 16¼"
  • Width: 16cm / 5"
  • Height: 7.5cm / 3"
  • Weight: 1.2kg / 2 lb 10oz

Materials recommended for simple wooden base (not supplied):

  • 10mm plywood base of approximately 600mm x 300mm
  • Two wooden blocks, each approximately 60 x 40 x 200-300mm long
  • Screws

We have placed cookies on your computer to help make this website better. You can change your cookie settings through your browser at any time. Otherwise, we'll assume you're OK to continue. For more information see our Cookie Policy.